Supermicro Server SYS-7045B-TR+ 4U

Cena: 1 561,13 €

Cena bez DPH: 1 300,94 €

Cenový vývoj
Možnosť nákupu aj na splátky.
Napr. teraz 156,11 a potom 10 x po 156,11.

Vložiť do košíka
Záruka: 24 mesiacov
Tovar dostupný na objednávku. Informujte sa u predajcu na dostupnosť tovaru.

Part No.: SYS7045BTR

SYS-7045B-TR+R- 4U Barebones
Key Features

1. Dual Intel® 64-bit Xeon® Quad-Core
or Dual-Core, with 667 / 1066 / 1333
2. Up to 64GB 667/533MHz DDR2 ECC
FB-DIMM (Fully Buffered DIMM)
3. 2 (x8) & 1 (x4) PCI-Express,
2x 64-bit 133MHz PCI-X,
1x 64-bit 100MHz PCI-X
4. Intel® (ESB2/Gilgal) 82563EB Dual-port
Gigabit Ethernet Controllerr
5. 8 x 3.5" Hot-swap Drive
6. 800W High Efficiency Redundant Power Supply
7. Tower or Rackmount


CPU Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz
Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz
NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors
System Bus 1333, 1066 & 667 MHz system bus
Operating System Software Supports 64-bit Operating Systems
Supports 32-bit Operating Systems

System Memory

Memory Capacity Sixteen 240-pin DIMM sockets
Supports up to 64 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Type 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 512 MB, 1GB, 2GB, 4GB
Memory Voltage 1.8V only
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset Intel® 5000P (Blackford) chipset
SATA Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support
IPMI Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIMLP)
(Optional: AOC-SIMLP-B)
(Optional: AOC-SIMLP-3) with 3rd LAN support
Network Controllers Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics ATI ES1000 controller with 16 MB of video memory
Super I/O Winbond 83627HG chip

Expansion Slots

PCI-Express 2 (x8) PCI-e slots
1 (x4) PCI-e (using x8) slot
PCI-X 2x 64-bit 133MHz PCI-X (3.3V) slots
1x 64-bit 100MHz PCI-X (3.3V) slot

Input / Output

Serial ATA Six Serial ATA ports
Six SATA hard drives supported
IDE Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Compact Flash (40-pin connector, IDE 1, single channel) slot
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy 1 Floppy controller; 1.44 MB, 2.88 MB
LAN 2x RJ45 LAN port
USB 2x USB rear ports
3x USB internal headers
Total 5 USB 2.0 Compliant / 1.1 Compliant
VGA 1x VGA Port
Keyboard / Mouse PS/2 keyboard and mouse ports
Serial Port / Header 1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
Parallel Port 1 ECP / EEP parallel port


Form Factor 4U Rackmountable / Tower
Optional Rackmount Kit (CSE-PT26)
Model SC745TQ-R800


Height 7.0" (178mm)
Width 17.2" (437mm)
Depth 25.5" (648mm)
Gross Weight 63 lbs (28.6kg)
Available Colors Beige, Black

Front Panel

Buttons Power On/Off button
System Reset button
LEDs Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED
Power Fail LED
Ports 2x USB Ports

Drive Bays

Hot-swap 8x Hot-swap Drive Bays
Supports up to 6x SATA Hard Drives
Peripheral Bay(s) 2x 5.25" Peripheral Drive Bay
1x 5.25" Bay For Floppy Drive

Peripheral Drives

Floppy Panasonic 3.5" 1.44MB Floppy Drive

SATA Backplane

SATA Backplane w/ Enclosure Management

System Cooling

Fans 3x 5000 RPM Hot-Swappable Cooling Fans
2x 5000 RPM Hot-Swappable Rear Exhaust Fan
Shroud 1x Air Shroud

Power Supply

(1 + 1) Redundant 800W AC power supply w/ PFC
AC Voltage 100 - 240V, 50-60Hz, 10-4 Amp
+5V standby 4 Amp
+12V 66 Amp
+5V 30 Amp
+3.3V 24 Amp
-12V 0.6 Amp

PC Health Monitoring

CPU Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
LED CPU / System Overheat LED
Other Features Chassis intrusion detection
Chassis intrusion header
SDDC Support

Operating Environment / Compliance
Environmental Spec. Operating Temperature: 10o to 35o C (50o to 95o F)
Non-operating Temperature: -40o to 70o C (-40o to 158o F)
Operating Relative Humidity: 8% to 90% (non-cond